The Sx2000 is built to deliver powerful performance. It handles loads up to 75 kW (HD) / 90 kW (ND) – making it perfect for compressors, conveyors, machine tools, elevators, textiles, fans, pumps, plastic extruders, wire drawings, etc.
Single-Phase 230V – 0.75 to 3.7kW
Three-Phase 230V – 0.75 to 18.5kW
Three-Phase 415V – 0.75 to 90kW
IP66 Three-Phase 415V – 0.75 to 22kW
IP20 standard & IP66 Optional
V/F, Sensorless Vector Control, Slip compensation
Starting Torque: 150% at 3 Hz for V/F, 200% at 0.5Hz for Vector Control
Conformal Coating complying to IEC 60721-3-3 class 3C2
Built-in RS485 Modbus
Peer to Peer Communication to share I/O’s
Built-in Brake Control
Inbuilt PLC functionality
Component Life Monitor
No Motor Detection
Built-in DC Reactor from 37kW to 90kW
Built-in Braking Chopper till 30kW
Dual rating operation
Designed to be used for heavy and normal duty applications.Overload capacity
Heavy duty operation: 150% of rated current for 60 sec
Normal duty operation: 120% of rated current for 60 sec
Safety Disable function (Safety Stop)
Sx2000 is compliant to the EU Machinery Directive without the additional of previously required external devices. Through this compliance, Sx2000 reduces the number of peripheral devices needed to satisfy safety regulation. It results in cost, space, and maintenance reduction.
Enhanced Brake control: Ideal for Crane & Lifts
Brake opening command by Drive under following condition
Inverter Output Frequency > Brake Release Frequency AND
Inverter Output Current > Brake Release Current
Brake release with Delay
Brake Close frequency different settings possible for Hoisting & Lowering Motion
Optional LCD keypad of Master drive enables to access every drive (Slave) connected via inbuilt RS485 communication so that the users adjust and monitor parameters easily.
Peer to peer communication among the drives allows sharing any I/O via inbuilt RS485 communication. It might be useful in case of limited number of I/O points for a certain system
User Sequence: Built-in PLC Functionality
User sequence creates a simple sequence from a combination of different function blocks with direct access to Drive parameters.
No Software required to create logic
The sequence can comprise of a maximum of 18 steps using 28 functions blocks.